1. Altair Lte Network Interface Driver Download For Windows 10
2. Altair Lte Network Interface Driver Download For Windows 8.1
3. Driver Download For Windows 10

Which Installation Should I Use?¶

srsLTE can be installed from packages or from source. The following decision tree should help users decide which is best for them:

In short, users looking for a simple installation who only expect to run basic srsLTE applications with USRP front-ends should use the package installation.Users who wish to modify srsLTE and/or use alternative RF front-ends such as limeSDR and BladeRF should install from source.

Package Installation¶

The srsLTE software suite can be installed using packages on Ubuntu:

To check for the latest drivers, kindly refer to the following link: Update drivers in Windows 10. If a new driver isn't found, check the device manufacturer’s website for the latest driver, download it, and then install it manually. To learn how to do this, see Fix network connection issues. Use the large search this link. If your PC had the same problem, just rollback the driver. Realtek Rtl8102e Rtl8103e Family Pci E Fast Ethernet Nic Driver for Windows 7 32 bit, Windows 7 64 bit, Windows 10, 8, XP. Any ideas why NIC Driver 8. A complete list of available network device drivers for Realtek RTL8168C/8111C. Altair-lte: migrated from SubscriptionState to PCO. Changes from version 1.8.0: + New 'filter policy' setting in the ModemManager daemon to decide which ports are probed and how. Currently these levels are defined: - WHITELIST-ONLY: Only devices or ports explicitly whitelisted with the new 'IDMMDEVICEPROCESS' udev tag are probed. Windows 10 supports broadband cellular networks provided by major wireless carriers. So if you're lucky enough to have a SIM-enabled Windows PC or device, you can get Internet access this way. Click Download File to download the file. When the File Download window is displayed, click Save to save the file to your hard drive. Browse to the location where you downloaded the file and double-click the new file. Read the information in the dialog window.

Package installs are also available for other distributions.

Note, only the Launchpad packages for Ubuntu are maintained by SRS. Different distributions will maintain their own packages for srsLTE, which may or may not be up to date. Check the available version before installingto ensure you are using the desired version of srsLTE.

Fedora does not yet have support for a package installation of srsLTE.

Installation from Source¶

• Mandatory requirements:

  • Common:

    • cmake https://cmake.org/

    • libfftw http://www.fftw.org/

    • PolarSSL/mbedTLS https://tls.mbed.org

  • srsUE:

    • Boost: http://www.boost.org

  • srsENB:

    • Boost: http://www.boost.org

    • lksctp: http://lksctp.sourceforge.net/

    • config: http://www.hyperrealm.com/libconfig/

  • srsEPC:

    • Boost: http://www.boost.org

    • lksctp: http://lksctp.sourceforge.net/

    • config: http://www.hyperrealm.com/libconfig/

For example, on Ubuntu 18.04, one can install the required libraries with:

or on Fedora:

Note that depending on your flavor and version of Linux, the actual package names may be different.

• Optional requirements:

  • srsgui: https://github.com/srslte/srsgui - for real-time plotting.

  • libpcsclite-dev: https://pcsclite.apdu.fr/ - for accessing smart card readers

• RF front-end driver:

  • UHD: https://github.com/EttusResearch/uhd

  • SoapySDR: https://github.com/pothosware/SoapySDR

  • BladeRF: https://github.com/Nuand/bladeRF

  • ZeroMQ: https://github.com/zeromq

Note, if using UHD we recommend version 3.15 LTS.

Download and build srsLTE:

Install srsLTE:

This installs srsLTE and also copies the default srsLTE config files tothe user’s home directory (~/.srs).

Baseline Hardware Requirements¶

The overall system requires 2 x RF-frontends and 2 x PCs with a Linux based OS.This can be broken down as follows:

The UE will be instatiated on machine 1 with an RF-frontend attached. The eNB will run on machine 2 with an RF-frontend attachedto communicate over the air with the UE. The EPC will be insantiated on the same machine as the eNB. See the following figure which outlinesthe overall system architecture.

A list of supported RF front-end drivers is outlined here.

Execution Instructions¶

The following execution instructions are for users that have the appropriate RF-hardwareto simulate a network. If you would like to test the use of srsLTE without RF-hardware pleasesee the ZeroMQ application note.

The srsUE, srsENB and srsEPC applications include example configuration filesthat should be copied (manually or by using the convenience script) and modified,if needed, to meet the system configuration.On many systems they should work out of the box.

By default, all applications will search for config files in the user’s homedirectory (~/.srs) upon startup.

Note that you have to execute the applications with root privileges to enablereal-time thread priorities and to permit creation of virtual network interfaces.

srsENB and srsEPC can run on the same machine as a network-in-the-box configuration.srsUE needs to run on a separate machine.

If you have installed the software suite using `sudomakeinstall` andhave installed the example config files using `sudosrslte_install_configs.sh`,you may just start all applications with their default parameters.

srsEPC¶

On machine 1, run srsEPC as follows:

Using the default configuration, this creates a virtual network interfacenamed “srs_spgw_sgi” on machine 1 with IP 172.16.0.1. All connected UEswill be assigned an IP in this network.

srsENB¶

Also on machine 1, but in another console, run srsENB as follows:

srsUE¶

On machine 2, run srsUE as follows:

Using the default configuration, this creates a virtual network interfacenamed “tun_srsue” on machine 2 with an IP in the network 172.16.0.x.Assuming the UE has been assigned IP 172.16.0.2, you may now exchangeIP traffic with machine 1 over the LTE link. For example, run a ping tothe default SGi IP address:

Altair Lte Network Interface Driver Download For Windows 10

Examples¶

If srsLTE is build from source, then preconfigured example use-cases can be found in the following folder: `./srsLTE/build/lib/examples`

Altair Lte Network Interface Driver Download For Windows 8.1

The following list outlines some of the use-cases covered:

• Cell Search

• NB-IoT Cell Search

• A UE capable of decoding PDSCH packets

• An eNB capable of creating and transmitting PDSCH packets

Driver Download For Windows 10

Note, the above examples require RF-hardware to run. These examples also support the useof srsGUI for real time plotting of data.